UL Emergency Ballast 184002

For emergency operation of Fluorescent lamps;
Mains supply:120V to 277V, 50/60Hz;
Life time : 5years;

Application:

 For emergency operation of Fluorescent  lamps. For normal operation must be used a separate AC ballast. See instruction manual for further details;

Start up time of normal operation is max. 5 seconds, also at low battery level. Start up time of emergency operation is max. 0.5 seconds;

A LED signal lamp is lit when the module is in normal operation and is switched off when the lamp is in emergency operation;

At normal surrounding temperature (from 0 Cº to 40 Cº), the charging time of the battery pack from 0%- to 100% is max. 24 hours. The discharging time is min.90 minutes;

At permanent temperatures in the surrounding of above 40 Cº and max. 55 Cº the charging time can be increased with up to 100% and the discharging time can be reduced.

Emergency operate one lamp minimum 90 minutes at reduced light output;

Battery pack is integrated with the emergency module.

Installation according to the instruction manual;

The module is IP20. In outdoor use or in surroundings with dust or moist, the fixture must be sufficiently IP-rated. No moisture or condensation must enter the module;

Technical Data:

Mains supply	120V to 277V, 50/60Hz
Tolerance of mains supply	100-300V
Input Wattage	3.5W
Max. Input current	0.1A
Max. Charging current	110mA
Battery Rating	1.8Ah,9.6V (1.2V x 8PCS) Nicd battery SC type, 17.3WH
Initial Lumen Output	1000LM
Lamps operated	Most 2'-8' single, bipin T8 & T12, long compact, HO or VHO fluorescent lamps
Emergency operation	90
Charging cycles*	500
Life time for battery pack	5 years
Operation time for module*	30,000 hours
Switching cycles for module*	20,000 times
Life time of module*	5 years
Compliant standards	UL 924
Approval	CUL & UL Listed
Mounting Measurement:	L359(351) * H37.5 * W50 mm
* At normal surrounding temperatures (from 0 Cº to 40 Cº)