emergency ballast

UL listed Emergency ballast
1. Min. 90 minutes operation.
2. 5 years life time.
3. Operating time for module: 30,000hours

UL listed emergency ballast

1. For emergency operation of Fluorescent  lamps. For normal operation must be used a separate AC ballast. See instruction manual for further details 
2. Start up time of normal operation is max. 5 seconds, also at low battery level. Start up time of emergency operation is max. 0.5 seconds 
3. A LED signal lamp is lit when the module is in normal operation and is switched off when the lamp is in emergency operation 
4. At normal surrounding temperature (from 0 Cº to 40 Cº), the charging time of the battery pack from 0%- to 100% is max. 24 hours. The discharging time is min.90 minutes 
5. Emergency operate one lamp minimum 90 minutes at reduced light output 
6. Battery pack is integrated with the emergency module.  
7. Installation according to the instruction manual

  

Mains supply	120V to 277V, 50/60Hz
Tolerance of mains supply	100-300V
Input Wattage	3.5W
Max. Input current	0.1A
Max. Charging current	110mA
Battery Rating	1.8Ah,9.6V (1.2V x 8PCS) Nicd battery SC type, 17.3WH
Initial Lumen Output	1000LM
Lamps operated	Most 2'-8' single, bipin T8 & T12, long compact, HO or VHO fluorescent lamps
Emergency operation	min. 90 minutes.
Charging cycles*	min. 500
Life time for battery pack	5 years
Operation time for module*	30,000 hours
Switching cycles for module*	20,000 times
Life time of module*	5 years
Compliant standards	UL 924
Approval	CUL & UL Listed by UL USA.
Mounting Measurement:	L359(351) * H37.5 * W50 mm
* At normal surrounding temperatures (from 0 Cº to 40 Cº)